, ,

Rode Broadcaster Large-Diaphragm Cardioid Condenser Microphone


Key Features
  • Radio, Broadcast, Podcast & Voice-Over
  • Cardioid Pattern Lowers Background Noise
  • High-Pass Filter Reduces Rumble
  • Boosted Proximity Effect for Big Tone
  • Mic Clip Works with Stands & Boom Arms

د.إ1,540.00 Excluding Tax

Compare

Rode Broadcaster Large-Diaphragm Cardioid Condenser Microphone Give your voice a rich, full, radio-ready sound with the Rode Broadcaster, a large-diaphragm condenser microphone designed specifically for broadcast, voice-over, radio, and podcast applications. The 1″ gold-plated capsule, low-noise circuitry, and pronounced proximity effect work together to deliver a warm and robust tone worthy of pro-level productions. Plus, the mic’s cardioid polar pattern naturally rejects sound behind the mic, picking up less background noise than many other polar responses.

Following broadcast tradition, it is an end-address mic with a clip that works with stands or boom arms (available separately). Unlike most mics, it has a special LED that can be used for “On-Air” indication when properly wired to a compatible console. Whereas many mics require an external screen to inhibit jarring “p” and “b” sounds, the Broadcaster has an internal pop filter designed to control such plosives. Being a true condenser mic, the Broadcaster should be connected via an XLR mic cable (available separately) to a mixer channel, mic preamp, or audio device that can supply phantom power.

  • Large diaphragm 1” gold-sputtered capsule
  • On-Air indicator LED
  • Ultra-low noise
  • Voice tailored low-cut feature
  • Internal pop-filter
  • 10 year extended warranty when you register your microphone

The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.

Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television

The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster’s native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative ‘On-Air’ indicator on the body that can be wired for external activation by the ‘Channel On/Mute’ function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones’ industry leading 10 year warranty.

 

For Radio, Broadcasts, and Podcasts

The Broadcaster is a large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications. Its rich, full-quality tailored response has an emphasized proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a podcast mic or a voice-over microphone for film and television.

Internal Pop Filter

The Broadcaster features an internal pop filter, designed to minimize vocal plosive sounds that can overload the microphone capsule and distort the audio output.

High-Pass Filter

In addition to the Broadcaster’s native 20 Hz to 20 kHz response, a selectable high-pass (low-cut) filter at 75 Hz is available to prevent low-end noise such as air conditioners and traffic from being recorded.

On-Air Indicator

The Broadcaster features an innovative “On-Air” indicator on the body that can be wired for external activation by the “Channel On/Mute” function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

Features at a Glance

  • Classic broadcaster-style, end-address mic
  • Emphasized proximity effect for robust vocal sound
  • Cardioid polar pattern reduces background noise
  • HF2 1″ capsule with gold-plated diaphragm
  • Internal pop filter reduces plosives
  • LED for power status or “On-Air” indication
  • Low-noise JFET circuitry
  • Switchable voice-tailored 75 Hz low-cut filter
  • Rugged stainless steel body
  • XLR 3-pin output connector
  • Operates on phantom power (24 or 48 VDC)
  • Includes mic clip and zipper pouch

 

Weight 0.91398863 kg
Dimensions 27.178 × 13.462 × 6.096 cm

Microphone

Primary Applications Broadcast, Podcast
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Speech/Voice Over
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1″ / 25.40 mm
Polar Pattern Cardioid
Orientation End Address
Circuitry Solid-State (JFET)
Pad None
High-Pass Filter 75 Hz
Tone Adjustment None
Gain Adjustment None
Indicators 1 x Single LED (Power, Status)
On-Board Controls High-Pass Filter
Windscreen Built-In

Performance

Frequency Range 20 Hz to 20 kHz
Maximum SPL 128 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Impedance 40 Ohms
Sensitivity -34 dBV/Pa at 1 kHz
Output Level 2 dBu (Max, 1 kHz)
Dynamic Range 114 dB A-Weighted
Signal-to-Noise Ratio 80 dB A-Weighted
Equivalent Noise Level 14 dB SPL A-Weighted

Connectivity

Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None

Power

Bus Power None
Operating Voltage 24 V (Phantom Power)
48 V (Phantom Power)
Operating Current Consumption 5 mA (Phantom Power)

Physical

Color Stainless Steel
Mounting Mic Clip/Stand Adapter (Included)
Included Case Zipper Pouch
Included Filters None
Construction Material Stainless Steel
Dimensions H: 2 x W: 2.6 x L: 6.6″ / H: 50 x W: 65 x L: 167 mm
Weight 1.3 lb / 577 g

Packaging Info

Package Weight 2.015 lb
Box Dimensions (LxWxH) 10.7 x 5.3 x 2.4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode Broadcaster Large-Diaphragm Cardioid Condenser Microphone”

There are no reviews yet.